Custom equipment mounts, adapters & replacement parts
Make existing equipment fit a specific installation or restore a component that is difficult to source. We can develop a new part or reconstruct geometry from a sample and its mating interfaces.
Your project, in practical terms
From requirement to finished part.
Here’s how we can bring design, fabrication, and delivery together around your needs.
Can you make an adapter that mounts a new sensor or camera to our existing equipment?
We can design a bracket or adapter that connects the existing mounting pattern to the new device, with offsets, slots, split clamps, and cable clearance as needed. Options include aluminum plates and compatible engineering plastics. Directly tapped threads from M2 to M18 and comparable imperial sizes can be specified where material section and engagement permit; suitable thermoplastic bodies can instead use M2–M8 heat-set inserts. A trial adapter can establish fit and adjustment before a repeat run, with shipping throughout the United States.
Where we start. Send both mounting interfaces, device weight, required position, adjustment range, and the exact screw sizes and pitches. We can develop CAD from drawings, measurements, or samples and review vibration, leverage, temperature, and access for installation.
Explore materials, dimensions, and details for each application. Use these dimensions as starting points. We develop the final construction and confirm specifications with you around your requirements.
01
Sensor & camera mounts
Position devices at a useful angle and distance with access for adjustment and cables.
Materials & fabrication
CNC-machined aluminum for rigid mounts, acetal for suitable precision interfaces, and ASA or nylon for shaped brackets. TPU isolation elements can be considered where controlled compliance is useful.
Dimensions & construction
Concepts include 1/8–1/2 in plates, slotted adjustment, split clamps, and interfaces for M4/M6/M8 or 1/4-20 hardware as required by the device. Suitable thermoplastic clamp bodies can use M4–M8 heat-set inserts for adjustment screws and mounting connections, with boss geometry sized to the selected insert and clamping load. Direct tapping in compatible materials can provide metric or imperial mounting threads, including 1/4-20 interfaces, without a separate insert; material thickness and engagement determine suitability.
What determines the choice
Determine device mass, lever arm, vibration, field of view, cable pull, and adjustment locking. Flexible isolation can change positioning stability; confirm whether the job needs vibration attenuation, rigid alignment, or both.
02
Networking & AV adapters
Custom brackets, rack interfaces, device cradles, and mounting plates for professional installations.
Materials & fabrication
CNC-cut aluminum or polycarbonate plates, printed device-specific cradles, and metal rack hardware. Ventilated sheet assemblies can combine off-the-shelf brackets with custom adapters.
Dimensions & construction
Develop 1U/2U rack concepts, custom rack ears, wall plates, under-desk mounts, and 1/8–1/4 in adapter plates with countersunk fasteners and access slots. Match hole patterns to the actual equipment drawings.
What determines the choice
Check connector reach, airflow, RF transmission, maintenance access, equipment weight, and rack support. A front plate alone may not support a deep or heavy device; shelves or rear support can be incorporated.
03
Spacers, shims & standoffs
Resolve offsets, alignment, and clearances with dimensions matched to the assembly.
Materials & fabrication
Machined acetal, nylon, aluminum, or stainless spacers; laser-cut compatible sheet for flat shims and printed parts for fit trials. Select electrical isolation or conductivity deliberately.
Dimensions & construction
Flat shim concepts span approximately 0.5–6 mm, while machined spacers and standoffs are dimensioned to the required length and bore. Specify through-holes, counterbores, threads, shoulder diameters, and mating-face parallelism. Standoffs and substantial spacer blocks can incorporate directly tapped internal threads from M2 to M18, plus comparable imperial sizes, where diameter and engagement length permit. Thin shims generally use clearance holes rather than tapped threads.
What determines the choice
Define compressive load, bolt preload, temperature, creep sensitivity, and the tolerance stack. A soft printed spacer may settle under sustained clamping; use material and contact area appropriate to the joint.
04
Cable & hose guides
Route and retain lines around existing equipment, connectors, and access points.
Materials & fabrication
Printed nylon or TPU retainers, machined UHMW or acetal guides, and aluminum support brackets. Replaceable liners can separate a rigid mount from a hose or cable jacket.
Dimensions & construction
Size channels and clips around the actual outside diameter, including sleeves and connectors. Incorporate split designs, screw mounting, radiused exits, and service openings; bend forms follow the line manufacturer’s minimum radius.
What determines the choice
Check repeated motion, abrasion, clamp pressure, temperature, chemical splash, and connector strain. Retention should not crush the line or transfer a bend directly into a connector; allow access to replace individual cables.
05
Knobs, handles, feet & end caps
Replace or customize nonstandard interface components for serviceable equipment.
Materials & fabrication
Printed ASA, nylon, or TPU components; machined acetal or aluminum knobs and handles; and compatible elastomer feet. Material and texture can be tailored to grip, cleaning, and appearance.
Dimensions & construction
Define D-shafts, keyed bores, set screws, threaded inserts, end-cap interference, and mounting-hole spacing. Feet may include replaceable pads; handles need clearance for fingers or gloves around the equipment. M5–M8 heat-set inserts and comparable imperial sizes can suit thermoplastic adjustment knobs and removable handles when the body provides sufficient insert engagement and surrounding material.
What determines the choice
Review applied torque, pull force, impact, UV, oils, and cleaning agents. A decorative cap and a load-bearing handle require different verification; recreate the functional interface rather than only the visible shape.
06
Legacy replacement components
Reconstruct unavailable covers, brackets, guides, and similar parts from functional references.
Materials & fabrication
Machined acetal, UHMW, nylon, or aluminum, along with printed engineering polymers for appropriate covers and guides. A new construction can replace an unavailable original material when the requirements support it.
Dimensions & construction
Reconstruct bores, offsets, clips, mounting faces, and running clearances from the sample and mating parts. Plate-based replacements may use 1/8–1/2 in stock; thicker blocks or assemblies follow the geometry.
What determines the choice
Separate wear, breakage, and distortion from the intended dimensions. Identify the failure mode and operating conditions before copying a damaged part; verify fit and function on the actual machine before making a repeat batch.
07
Wear strips & sliding pads
Replace or add controlled contact surfaces on equipment and fixtures.
Materials & fabrication
CNC-machined UHMW, acetal, or other application-selected wear polymers.
Dimensions & construction
Specify thickness, countersunk or slotted mounting, contact width, running clearance, and replaceable segments.
What determines the choice
Match material to contact pressure, speed, temperature, lubrication, debris, and mating surface. Account for thermal movement and sustained-load creep.
08
Guide blocks & bushings
Locate moving shafts, parts, or tools in an agreed mechanism.
Materials & fabrication
Machined acetal, nylon, selected bearing polymers, or metal with suitable inserts.
Dimensions & construction
Define bore fit, flange, retention, lead-in, lubrication access, and alignment to mating components.
What determines the choice
Review speed, load, wear, temperature, and permitted play. A printed fit trial is distinct from a validated bearing or precision guide.
09
Custom rollers
Support, guide, or contact products at a defined location.
Materials & fabrication
Machined polymer or aluminum bodies with purchased bearings, shafts, and compatible contact sleeves.
Dimensions & construction
Define diameter, face width, crown or profile, bore fit, retention, and bearing seating.
What determines the choice
Check speed, load, concentricity, surface marks, chemicals, and pinch points. Bearing selection and complete assembly performance follow the operating conditions.
10
Belt guides
Keep a belt or adjacent product aligned within the machine layout.
Materials & fabrication
Machined UHMW or acetal guides with aluminum supports and replaceable wear pieces.
Dimensions & construction
Develop guide height, edge radius, running gap, mounting adjustment, and clearance at pulleys or transitions.
What determines the choice
Review belt speed, tracking, heat, tension, and wear. Avoid using a rubbing guide to conceal a misaligned or incorrectly tensioned drive.
11
Custom end stops
Establish repeat travel or product-position limits.
Materials & fabrication
Aluminum or steel-backed bodies, engineering-polymer contact faces, and compatible elastomer bumpers.
Dimensions & construction
Define stopping location, adjustment slots, contact area, mounting, and replaceable impact surfaces. Tapped holes in compatible bodies can accept adjustment screws or locking hardware; M8–M18 connections may suit larger stops when the body section, engagement, and load support them.
What determines the choice
Distinguish a positioning stop from an energy-absorbing stop. Moving mass, speed, cycle count, and allowable deflection determine the construction.
12
Replacement machine feet
Restore support, leveling, or surface protection on equipment.
Materials & fabrication
Machined or printed bodies for suitable loads, purchased threaded hardware, and specified elastomer pads.
Dimensions & construction
Define thread size, adjustment range, base area, retention, and clearance to the machine frame. Compatible solid mounting blocks can be tapped for M8–M18 leveling studs or comparable imperial sizes. Match thread pitch, engagement, and locking method to the selected stud and supported load.
What determines the choice
Check static and dynamic load, floor condition, oils, creep, and vibration. Leveling and vibration isolation are different functions and need different selection criteria.
Design is part of the engagement
Help defining it. Help making it.
We can measure a sample, distinguish worn geometry from functional requirements, model the interfaces, and check a first part on the equipment. If a specialist process is the better fit, we can prepare a production package or coordinate fabrication.
Design and documentation can stand alone, continue through our fabrication work, or support production by a specialist facility.
Reproduce an unavailable component, improve a recurring failure, or adapt serviceable equipment to a new requirement. We help define the functional geometry and produce a replacement with a reusable design record.
Product-specific tooling that connects your equipment to the parts it handles. We design and fabricate gripper interfaces, conveyor guides, product nests, and interchangeable format parts for new products and changing production requirements.
Custom flow paths that connect equipment, move loose material, or direct air where the application needs it. We develop transitions, pickups, hoppers, and outlets around your equipment and operating conditions.