Design + fabrication · Miami, Florida

Custom acrylic, ADA & illuminated signs

Commercial signage designed for the space, message, and mounting conditions. We help develop artwork, material choices, dimensional details, and fabrication for individual signs or coordinated sign families.

Applications & construction options

Built around your use.

Explore materials, dimensions, and details for each application. Use these dimensions as starting points. We develop the final construction and confirm specifications with you around your requirements.

01

Custom acrylic signs

Office, reception, door, and wall signs with tailored shapes, colors, layering, and mounting.

Materials & fabrication
Laser-cut and engraved cast acrylic, CNC-routed acrylic for pockets or controlled edge features, and layered clear, opaque, frosted, or mirrored sheet. Reverse engraving can place the marking behind a transparent face.
Dimensions & construction
Sign-face concepts span 1/16–1/4 in sheet, with thicker layered assemblies for depth. Specify overall size, corner radii, holes, standoffs, adhesive mounting area, and whether the back is visible.
What determines the choice
Match transparency, contrast, glare, cleaner compatibility, and mounting to the location. Acrylic is useful for appearance and engraving, but impact, solvent exposure, or heat may point to a different material or construction.
02

ADA room identification signs

Tactile and Braille sign packages using specified Rowmark materials and reviewed color combinations.

Materials & fabrication
Rowmark ADA Alternative and compatible tactile applique selected from the applicable material and color catalog. We develop matte backgrounds, raised characters, and Braille together as your sign package.
Dimensions & construction
Candidate backers may use 1/16–1/8 in sheet, with a specified tactile layer; required raised characters are at least 1/32 in above the background. Sign dimensions follow the message, character layout, Braille, and mounting space.
What determines the choice
Review the applicable sign category, character style and spacing, Braille geometry, contrast, glare, and installed location. A catalog-approved material pair supports the design but does not establish compliance of the finished and installed sign.
03

Directional & wayfinding signs

Coordinated room, corridor, department, and destination signs with consistent hierarchy.

Materials & fabrication
Engraved acrylic or Rowmark laminates for indoor sign families; routed HDPE or aluminum for suitable exterior locations. Replaceable inserts can accommodate changing tenants or destinations.
Dimensions & construction
Starting panel options range from 1/16–1/4 in, with framed, projecting, wall-mounted, or modular assemblies. Letter size follows viewing distance and location; arrows, room numbers, and mounting patterns are coordinated across the schedule.
What determines the choice
Check sightlines, lighting, glare, language, destination consistency, and exposure. Large panels require support and expansion allowance; a direction sign viewed across a corridor needs a different layout from a door label read at arm’s length.
04

Dimensional logos & lettering

Cut and assembled brand elements with spacing templates and mounting details.

Materials & fabrication
Laser-cut acrylic, CNC-routed wood or MDF, and CNC-cut aluminum faces. Layered construction, painted edges, spacers, and stud-mounted elements create different depth and shadow effects.
Dimensions & construction
Flat letters may start at 1/8–1/4 in sheet; thicker wood or built-up assemblies can create greater projection. Prepare a full-size spacing template, mounting pattern, and minimum stroke details compatible with the cutting process.
What determines the choice
Review small internal corners, fragile strokes, wall texture, adhesive area, installation alignment, and indoor or outdoor exposure. Mounting has to support individual letters, including narrow elements with little bonding area.
05

LED-illuminated signs

Custom sign assemblies with lighting layout, diffusion, access, and electrical integration defined in scope.

Materials & fabrication
Light-diffusing or translucent acrylic faces with aluminum or suitable polymer housings, purchased LED modules, and accessible power components. Opaque layers and internal baffles can control unwanted light.
Dimensions & construction
Face concepts of 1/8–1/4 in and a trial cabinet depth of roughly 2–6 in can be evaluated with the selected LEDs. Provide removable faces or service panels, wire routes, mounting points, and room for the specified driver.
What determines the choice
Check LED spacing, hotspots, brightness, color consistency, heat, power-supply access, and moisture exposure. Depth is established by an illumination sample; electrical listing, installation, and connection responsibilities are scoped for the intended site.
06

Edge-lit & changeable signs

Acrylic lighted panels, replaceable name inserts, and modular sign components.

Materials & fabrication
Engraved clear cast acrylic for edge-lit graphics, compatible LED channels, and acrylic or aluminum frames. Changeable versions can use removable name strips or slide-in message panels.
Dimensions & construction
Edge-lit panel concepts may use 1/4–3/8 in acrylic, matched to the light channel. Changeable signs may combine 1/16–1/8 in inserts with routed tracks, stop screws, or removable end caps.
What determines the choice
Check engraving density, edge finish, light coupling, graphic legibility, and how messages are changed. Avoid designs that require removing wall hardware or disturbing electrical connections for routine updates.

Design is part of the engagement

Help defining it.
Help making it.

Bring a logo, sign schedule, room list, or site photographs. We can develop the sign system, prepare fabrication artwork, select construction details, and coordinate a sample for review before producing the full set.

Design and documentation can stand alone, continue through our fabrication work, or support production by a specialist facility.

How design assistance works →

Material & process direction

Choose for the application.

  • Rowmark ADA Alternative and compatible tactile materials
  • Clear, colored, frosted, mirrored, and light-diffusing acrylic
  • Suitable wood, aluminum, mounting hardware, and lighting components

These are starting points for selection. We confirm the exact grade, thickness, finish, availability, and production route for your project.

Material details & selection →

A useful starting brief

What to send us.

Artwork or brand files, wording or sign schedule, dimensions, installation photos, indoor or outdoor use, lighting needs, and accessibility requirements.

Send what you have. We can help identify and develop the missing information.

Start a project brief ↗

Related solutions

The adjacent details matter.

A complete solution may combine several of these applications.

Your next useful step

Bring the application. We’ll help develop the solution.

Tell us what must work, what already exists, and the quantity you need. Technical and project conversations are available in English and Spanish.

Tell us what must work