Design + fabrication · Miami, Florida

Custom assembly jigs, fixtures & installation templates

Purpose-built tools that locate, hold, guide, or align parts for repeatable work. We help translate a recurring manual operation into a fixture that fits the part and the person using it.

Your project, in practical terms

From requirement to finished part.

Here’s how we can bring design, fabrication, and delivery together around your needs.

Can you make a fixture that holds our parts in position while we assemble or bond them?

We can design an assembly fixture from your parts and work sequence, including locating pockets, hard stops, clamps, bond-line spacers, and replaceable contact surfaces. Printed nests, machined engineering plastics, and aluminum bases can be combined according to force, adhesive exposure, and required repeatability. Suitable plastic modules can use heat-set inserts, while compatible solid bases can have tapped holes. Start with one fixture for operator trials, then reproduce the approved configuration for other workstations with nationwide delivery.

Where we start. Send representative parts or drawings, the assembly steps, critical alignment dimensions, adhesive information, and daily cycle count. We can help develop the CAD and locating scheme, with trial checks focused on loading, tool access, part variation, and release after assembly.

Tell us about your requirements →

Applications & construction options

Built around your use.

Explore materials, dimensions, and details for each application. Use these dimensions as starting points. We develop the final construction and confirm specifications with you around your requirements.

01

Assembly positioning fixtures

Locate components against defined references while leaving room for tools and fasteners.

Materials & fabrication
Printed PETG or nylon nests for shaped parts; CNC-machined acetal or aluminum bases for repeat use. Replaceable TPU, UHMW, or other selected contact pads can protect finished surfaces.
Dimensions & construction
Base concepts may start at 1/4–3/4 in thick with dowel locations, hard stops, screw-down nests, and toggle-clamp interfaces. Locate the part from functional references rather than clamping every surface. Suitable thermoplastic nests can use M4–M8 heat-set inserts for replaceable stops, screw-down modules, and adjustment hardware, with local thickness and reinforcement matched to the connection. Compatible solid bases can also have directly tapped mounting holes, such as M6–M12 for stops and clamp hardware, with thread engagement and edge distance matched to the material and load.
What determines the choice
Define part variation, clamp force, tool approach, cycle count, and allowable movement during assembly. A fixture should support the operation without distorting the component; worn contact points can be made replaceable.
02

Drilling & installation templates

Repeat hole patterns, offsets, and installation positions on compatible workpieces.

Materials & fabrication
CNC-routed polycarbonate, acetal, or aluminum templates with hardened drill bushings where repeated tool contact warrants them. Clear polycarbonate can preserve sight of reference marks.
Dimensions & construction
Starting plate thicknesses of 1/8–1/2 in, indexed hole patterns, edge fences, clamp locations, and interchangeable bushings for specified drill sizes. The bushing length and seating follow the selected hardware.
What determines the choice
Resolve hole position tolerance, drill clearance, chip evacuation, workpiece thickness, and prevention of template slip. A printed hole can demonstrate location, but repeated drilling calls for a wear-resistant guiding interface.
03

Adhesive-bonding fixtures

Hold components in alignment while preserving access for adhesive application and cleanup.

Materials & fabrication
Machined HDPE, acetal, or aluminum nests with replaceable release surfaces where compatible with the adhesive; printed parts can support low-temperature trial work.
Dimensions & construction
Use stepped pockets, bond-line spacers, alignment pins, and removable clamps. Spacer thickness is set by the adhesive’s specified gap; fixture walls and base thickness follow the force needed to hold the actual assembly.
What determines the choice
Identify the adhesive, cure temperature, squeeze-out path, solvent cleanup, and removal direction. Test contact materials for sticking or chemical attack, and avoid trapping the finished assembly after the bond cures.
04

Label-placement jigs

Position labels, decals, or nameplates consistently relative to product features.

Materials & fabrication
Laser-cut acrylic for visible alignment, CNC-routed acetal or aluminum for repeated use, and printed nests for products with curved or irregular shapes. Soft contact pads can protect coated surfaces.
Dimensions & construction
Candidate guides use 1/8–1/4 in sheet, product-location pockets, label-window edges, peel access, and adjustable stops. Design from the label’s actual cut size and placement tolerance, including rounded corners.
What determines the choice
Check label curl, adhesive tack, surface texture, taper, and the operator’s application motion. Keep the adhesive away from guide surfaces and make the locating references visible after the label has begun to contact the product.
05

Wire-harness boards

Arrange routing paths, connector positions, and identification for repeat harness assembly.

Materials & fabrication
CNC-routed plywood, HDPE, or aluminum-backed boards with replaceable pegs, connector nests, clips, and engraved route labels. Choose contact materials for the wire insulation and cleaning environment.
Dimensions & construction
Board layouts can use 1/2–3/4 in panel concepts with modular mounting holes, numbered branches, bend-radius forms, and connector orientation keys. Harness lengths are dimensioned from agreed connector or branch references.
What determines the choice
Account for bundle diameter, minimum wire bend radius, branch take-up, connector strain relief, and removal from the board. Different harness revisions can use interchangeable nests and a clearly identified routing layout.
06

Machining & finishing nests

Support suitable parts during secondary operations, with the loads and tool access evaluated for the process.

Materials & fabrication
Machined aluminum, acetal, or HDPE nests with dedicated clamps and replaceable pads; printed tooling can be useful for low-force trials. Choose the workholding construction around the cutting or finishing operation.
Dimensions & construction
Develop pockets, vacuum channels where appropriate, sacrificial backing, and tool-clearance features. Starting base thicknesses of 1/4–1 in are illustrative; hold-down spacing and support follow part size and cutting loads.
What determines the choice
Review cutter forces, sanding heat, coolant or solvent exposure, chip paths, and the risk of lifting or rotating the part. Check clamping on the real setup before operation; a shape-matched pocket alone is not secure workholding.
07

Reusable painting masks

Protect selected surfaces during repeat coating operations.

Materials & fabrication
CNC-cut compatible sheet, machined masks, or printed shaped masks with replaceable contact edges.
Dimensions & construction
Define the masked boundary, stand-off, locating stops, grips, and release direction; thickness follows shape retention and spray access.
What determines the choice
Check coating solvents, bake temperature, buildup, edge definition, and removal without damaging the finish. Material selection follows the complete coating cycle.
08

Spray stencils

Apply repeat symbols, identifiers, or patterns to products and surfaces.

Materials & fabrication
Laser-cut compatible plastic sheet or CNC-cut metal with a finish suited to cleaning.
Dimensions & construction
Define letter bridges, minimum detail, handles, registration points, and curvature to match the target surface.
What determines the choice
Control overspray, stencil lift, paint buildup, solvent exposure, and cleaning wear. Test fine details with the actual paint and spray distance.
09

Adhesive-dispensing guides

Locate a nozzle or define a repeat bead path during bonding.

Materials & fabrication
Machined acetal or HDPE guides, aluminum supports, and compatible printed trial parts.
Dimensions & construction
Include stand-off features, registration edges, nozzle clearance, start/stop references, and removable cleanup surfaces.
What determines the choice
Review adhesive chemistry, bead size, cure heat, squeeze-out, and release. Keep the guide from contaminating the bond or adhering to the assembly.
10

Soldering & rework holders

Support boards and components while leaving the working area accessible.

Materials & fabrication
Aluminum bases, application-selected insulating contacts, and purchased clamps; printed parts can support cooler, remote portions of the fixture.
Dimensions & construction
Define board-edge support, component relief, adjustable clamps, underside access, and probe or tool clearance.
What determines the choice
Check localized heat, hot-air exposure, ESD requirements, flux and cleaning chemicals, and board distortion. Material suitability depends on actual contact temperature.
11

Heat-set insert installation fixtures

Position a part and guide insert installation consistently.

Materials & fabrication
Aluminum or engineering-plastic nests with replaceable locating elements and suitable heat-resistant interfaces.
Dimensions & construction
Develop installation fixtures for M2–M8 heat-set inserts and comparable imperial sizes. Define insert axis, support beneath the boss, depth stop, tool clearance, and removal direction from the part and insert specifications. Interchangeable locating nests and tooling clearances can accommodate different insert diameters and lengths.
What determines the choice
Control alignment, installation force, heat exposure, and part deformation. Check pull-out or torque performance using the final material and process.
12

Trimming & deburring guides

Make a recurring finishing operation easier to locate and repeat.

Materials & fabrication
Machined aluminum, acetal, or other suitable guide bodies with replaceable wear surfaces and purchased bushings where appropriate.
Dimensions & construction
Add reference stops, guarded tool clearance, controlled offsets, sacrificial backing, and a secure workholding interface.
What determines the choice
Review cutting forces, chips, tool wear, edge quality, and hand access. The guide must support the operation without allowing the tool to catch or displace the part.

Design is part of the engagement

Help defining it.
Help making it.

We can review the operation, identify the surfaces that control alignment, develop the fixture, and refine it against actual parts. The design can accommodate variation without forcing operators to work around the tool.

Design and documentation can stand alone, continue through our fabrication work, or support production by a specialist facility.

How design assistance works →

Material & process direction

Choose for the application.

  • PETG, nylon, and selected reinforced filaments
  • Acetal, HDPE, and other machinable plastics
  • Plywood, tooling board, aluminum, and purchased hardware as appropriate

These are starting points for selection. We confirm the exact grade, thickness, finish, availability, and production route for your project.

Material details & selection →

A useful starting brief

What to send us.

Parts or drawings, photos or video of the operation, critical dimensions, tools used, production frequency, and the variation you want to reduce.

Send what you have. We can help identify and develop the missing information.

Start a project brief ↗

Related solutions

The adjacent details matter.

A complete solution may combine several of these applications.

Your next useful step

Bring the application. We’ll help develop the solution.

Tell us what must work, what already exists, and the quantity you need. Technical and project conversations are available in English and Spanish.

Tell us what must work